Fayetteville · Springdale · Rogers · BentonvilleEmail only  ·  hello@whitetailfence.com
Whitetail Fence Co.
Northwest Arkansas
Free quotes for anything around your home. Northwest Arkansas.
Fence guide · Best of NWA Home Services

Do You Need a Permit for a Fence in Bentonville or Rogers? (2027)

Do you need a fence permit in Bentonville or Rogers? Heights, setbacks, HOA and 811 rules with city sources. Free quotes for anything around your home, NWA.

Short answer: - Bentonville: yes. New and replacement fences need a fence permit. The fee is $30, and you'll need a site plan and a photo or cut sheet of the fence (City of Bentonville). - Rogers: usually no. Rogers "does not currently require fence permits," but a building permit is required if the fence is over 7 ft tall and/or has concrete footings (City of Rogers). - Everywhere: Arkansas law requires a call to 811 before digging, and your HOA may need to approve the fence too.

This page is for general information as of October 2026, not legal advice. Rules change, so confirm with the city before you build.

Free matching for NWA homeowners

Ready to build once the permit's sorted?

Tell us your town and the fence you want. We'll try to match you with one local pro who knows the permit step.

Request a fence quote →

Whitetail Fence Co. is a free referral and matching service, not a contractor. Pros are independent businesses.

Bentonville fence permit at a glance

Item Rule
Permit needed? Yes, for new and replacement fences
Fee $30 (fees)
What to submit Application, site plan showing the fence location, photo or cut sheet with the finished side marked
Where Building & Fire Safety, 305 SW A Street (applications)
Max height 6 ft above grade; 8 ft in downtown zones
Front yard 4 ft max
Setback At least 5 ft from the street or right-of-way; no fences in sight triangles
Easements None in platted drainage easements; a gate at each end in utility easements
Finished side Must face out where visible from a public right-of-way
Pool barriers At least 48 in tall, max 2-in gap at the ground, self-closing and self-latching gates
Prohibited Razor wire, barbed wire and electric fences in residential zones
Expiry Permit is void if work hasn't started within 6 months

Sources: Fence application and Residential Submittal, Appendix B.

Rogers fence rules at a glance

Item Rule
Fence permit Not currently required
Building permit Required if over 7 ft tall and/or with concrete footings
Front yard "Should be limited to 4 feet"
Fire hydrants No fence within 3 ft
Easements Ask city staff before fencing a utility or drainage easement
Zoning height table Most residential zones: 4 ft exterior / 6 ft interior

Sources: Rogers FAQ (fences), Rogers FAQ (building inspections) and the Rogers development code, Table 4.5.A (via Zoneomics).

Check this first: fence posts are often set in concrete. Rogers' FAQ doesn't say whether concrete-set posts count as "concrete footings." Ask Rogers Community Development before you build, and keep their answer in writing. Outside city limits, Benton County rules apply instead.

Nearby cities

HOA approval

City approval doesn't mean HOA approval. For example: - Bella Vista POA covenants require written Architectural Control Committee approval of the fence type, height, materials and location before you build (Bella Vista POA). - Rogers' Stoney Creek Place covenants ban front-yard fences and chain link (covenants).

Call 811

Arkansas law requires homeowners to contact Arkansas 811 before digging, including for fence posts. Utilities have two working days to mark their lines (Arkansas 811).

FAQ

Do I need a permit to replace a fence in Bentonville? Yes. Bentonville's fence permit covers both new and replacement fences, and the fee is $30.

Do I need a fence permit in Rogers, AR? Generally not. You need a building permit only if the fence is over 7 ft and/or has concrete footings. Confirm how that applies to concrete-set posts.

How tall can my fence be in Bentonville? 6 ft above grade, or 4 ft in the front yard. Downtown zones allow 8 ft.

How close to the street can I put a fence in Bentonville? At least 5 ft from the street or right-of-way, and never inside a sight triangle.

What does a fence cost in Bentonville or Rogers? Typical installed ranges run from $9–$30 per foot for chain link to $50–$85 for wrought iron (HomeGuide, 2026). Get written estimates. See the 2027 NWA cost guide.

One more check

Ask your pro in writing who files the permit and who requests the Arkansas 811 locate. Questions about Whitetail? Email hello@whitetailfence.com.


Published by Whitetail Fence Co. Listings are not paid and not endorsements.

Whitetail Fence Co. is a free referral and matching service. We don't perform, supervise or warrant any work. Pros are independent businesses, not our employees or agents, and we aren't a party to any agreement between you and a pro. Information here is general and may change; confirm details, licensing, insurance and permits directly. See our Terms and Privacy Policy.

Free quotes

We do the hunting, you get the deal.

Skip the searching, calling around and waiting on callbacks. Tell us the job and we'll match you with a local pro, free.

Smart tip: ask for a written estimate and proof of insurance.

Whitetail Fence Co.

Your search can end here.

One line about your project, that's it. Free, by email, no obligation.

Go to the quote form